FAQs

Filter
Reset
Reset
Reset

Will it power a Raspberry Pi?

Accessories
General
iPower
Yes, it will work with the Raspberry Pi 2 or under since the Raspberry Pi 3 requires up to 3A which the iPower can not supply, however, the iPowerX can…
Read more

Will it work with 21 ohm output device?

Analogue
General Operation
xCAN
The “constant current drive grove” is a 21 Ohm resistor, as shown by JA measurements in Stereophile: “Although Apogee describes the Groove’s output impedance as variable and depending on the…
Read more

XBass frequency boost with gain added?

Analogue
Operation
micro iTube2
Question: Is it only and specifically 20Hz that is augmented or is it the bandwidth around 20Hz? In other words, is the Q high (narrow bandwidth) or low at 20Hz…
Read more

xBass pop?

Analogue
Operation
Pro iCAN Pro iCAN Signature
As the Pro iCAN/Pro iCAN Signature switches the signal it is possible that mild pops happen during switching, when the signal is cut or returns.
Read more

XMOS processor

DAC
Technical
Pro iDSD Pro iDSD Signature
The XMOS processor handles primarily the interfaces, including USB connections, SPDIF/AES-EBU connection and I2S input from the Wi-Fi/Network audio module. All inputs are decoded, pass through a memory buffer, then…
Read more

ZEN Stream I What’s in the box?

Accessories General Power
Charging General Operation Power Technical
ZEN Stream
The ZEN Stream box contains: 1 x ZEN Stream 1 x Ethernet cable 1 x Plastic screwdriver 1 x Power adapter 1 x Antenna 1 x Instruction card 1 x…
Read more