iGalvanic3.0
Love your computer audio? But plagued by buzz, hum and jitter?
The iGalvanic3.0 can help. It will lift your computer audio to the next level.
Never fear, the iGalvanic3.0 is here. Galvanic isolation on USB3.0.
It is for any computer system. Plug into any USB port via your DAC. Put simply, it ‘creates’ a new, interference free signal.
No more noise, no more jitter. (And not an easy thing to do on USB3.0!)
Our iGalvanic3.0 breaks ground loops, avoids noise-coupling in applications that require hi-speed USB transfers and dramatically improves sonic performance.
Perfect for audiophiles seeking maximum sound quality from their USB digital audio system.
If computer audio is your thing, then you know about digital signals and how annoying interference can be.
Listening on a Mac? These aren’t earthed so produce a natural buzz and hum (I can hear mine now!)
Using a laptop? Their earth adds distortion due to multiple cables.
Output Voltage | 5V ± 3% @ 500mA load |
Output Current | Up to 900mA (on USB3.0 port WITH USB3.0 cable). Up to 500mA (on USB2.0 port) |
Output Noise floor | 0.5uV(0.0000005V) @ 500mA load |
Ground Connection | ISO, RF, DC-RF |
USB Standards | USB 3.0 Super-speed 5.0Gbps USB 2.0 Hi-speed 480Mbps USB 2.0 Full-speed 12Mbps USB 2.0 Low-speed 1.5Mbps |
Connector host-side | USB 3.0 B-Type |
Connector device-side | USB 3.0 A-Type |
Input Voltage | DC 4.5V to 5.5V USB Bus Power |
Power consumption | < 6W (includes powered USB device) |
Electrical Safety Standard | BS 7671:2008 ELV |
Isolation Device max Voltage | 3000 Vrms Isolation Voltage per UL 1577 |
Dimensions | 93 (l) x 67 (w) x 28 (h) mm |
Weight | 128g (0.28lbs) |
Warranty period | 12 months |
+
Mercury USB Cable 1M
Generic USB cables can have a negative effect on your music.
Meet Mercury, created by iFi to give you maximum signal transfer and minimum interference.
Looking for maximum signal transfer from your cables, then the iFi Mercury cable is for you.
Standard mass-produced cables normally have the signal and power cables compacted closely together. This hinders conductivity and often results in poor signal transfer.
Not so with our Mercury cable.
…mercurial, fleet-footed by nature.
The Mercury cable carries the audio signal and power in two separate cables. It employs heavy OFHC continuous copper silver matrix conductors for the best possible signal transfer.
Each iFi cable follows closely the tech specs of usb.org. The cable construction is a custom minimum inductance parallel type with dual-shielding. This protects the cable from RFI and EMI noise and provides the cleanest transfer medium possible. This means sound quality is not compromised as with many ‘off the shelf’ versions where inadequate shielding is commonplace. Crucially, the whole design hardly has a 5% tolerance to the 90ohm impedance rule.
The signal runs through the cable and the final connector. This connector must also be exceptional.
Most USB cables use moulded plastic covered connections that do not shield the high frequencies present in the USB data link and noise radiates out. Very few manufacturers make their own connectors and rely mass-produced connectors which means durability is compromised.
Our FINAL USB connectors provide impeccable end-to-end RF shielding. They are machined entirely from solid, aircraft-grade aluminium.
+
iSilencer3.0
Does your USB audio system suffer from annoying background noise?
The iSilencer3.0 is for anyone who wants a simple way to reduce distortion and enjoy clearer, noise-free tunes.
Background noise can often haunt your enjoyment of your music or movies.
At iFi, we ain’t afraid of no ghosts and came up with the iSilencer3.0 to rid your sound of these audio gremlins.
Simply plug the iSilencer3.0 directly into the USB port of your computer. Easy. You’ll notice you get the deeper detail in your music. Music will seem clearer, more transparent and bass will be improved.
The spooks are gone.
This device can be used not only at the active USB ports but also at unused USB ports too. It will reduce EMI.
Using multiple iSilencers (and therefore the inbuilt ANC circuit) will double the noise reduction each time the number of units is doubled.
Just don’t cross the streams.
The iSilencer3.0 uses iFi’s improved Active Noise Cancellation+® tech to decrease noise by 100x the common noise filter. This is equivalent to 40dB. We use our REBalance® tech to get rid of clicks and distortion.
This little gadget is a hassle free way to banish those frustrating and unnecessary ‘sound spooks’ that plague your music.
As the song says, Enjoy the Silence. Long live Depeche Mode.