Nano iDSD BL
The nano iDSD Black Label is a portable DAC and headphone amplifier. It will enhance your personal audio.
On your daily commute or even once you get to in the office, the nano BL will boost the sound quality of your music and supercharge to your day.
The nano iDSD Black Label plays Hi-Res audio up to DSD256
so you can enjoy your tunes in the original format just as the artists intended.
Getting into MQA? The nano BL is MQA ready. Use it with Tidal ‘HiFi’ on your computer or mobile.
Also, Roon tested for simple set-up should you wish to give Roon a whirl.
The iFi exclusive S-Balanced circuit provides all the benefits of balanced outputs such as low-noise and less distortion when used with headphones and IEMs fitted with balanced wiring.
For single-ended headphones, S-Balanced cuts crosstalk in half. The benefits are ‘clearly’ audible.
Fancy getting technical? The nano BL has a Listen option (Minimum Phase Bezier Filter) and a Measure option (Linear Phase Transient-Aligned Filter) for those who like to try a variation to the playback.
We say just switch it on, plug in your device, and listen away.
There is no going wrong with 10 hours of battery life.
The nano iDSD Black Label is small but mighty with 10x more amplification power than an iPhone.
It can drive most headphones and has our iEMatch technology built-in, so it can work with In-Ear-Monitors (IEMs).
The in-built iFi iPurifier means it delivers clean, quality music with no buzz, no hiss and no fuss!
General | |
Input(rear) | USB2.0 type A ‘OTG’ Socket (with iPurifier® technology built-in) |
Output(rear) | 1 x audio fixed line out L+R 3.5mm |
Digital Filter | 2 positions. 2 filters |
Outputs(front) | 2 x 3.5mm headphone audio outputs. ‘Direct’ and ‘iEMatch®’ |
DAC | |
DAC | DSD, DXD, PCM DAC by Burr Brown Bit-Perfect DSD processing, Bit-Perfect DXD processing |
Clock | Low-jitter crystal clock |
Audio Formats | DSD 256/128/64/12.4/11.2/6.2/5.6/3.1/2.8 DXD 384/352.8kHz PCM 384/352.8/192/176.4/96/88.2/48/44.1kHz MQA 88.2/96/176.4/192kHz filters |
Filter–PCM | Listen (transient optimised minimum phase) Measure (frequency response optmised) |
DSD | Listen (extended bandwidth transient optimised) Measure (narrow bandwidth, low output band noise optimised) |
DXD | Fixed Bit-Perfect Processing |
MQA | Fixed MQA Filter |
Headphone Amplifier | |
Amplifier | Dual Mono 2 x 285mW Direct Drive, coupling capacitor free circuit for highest fidelity |
Volume Control | 3.5mm TRRS with Balanced compatible wiring |
Dynamic Range(including DAC) | > 109dB(A) @ 3v (Direct) > 107dB(A) @ 0.5V (iEMatch®) |
THD &N (@ 125mW/30R) | < 0.005% |
Max. Output (<10% THD) | > 3.5V @ 600Ω Load (Direct) (20mW/600Ω) > 2.9V @ 30Ω Load (Direct) (285mW/30Ω) > 1.7V @ 15Ω Load (Direct) (200mW/15Ω) |
Output Impedance | < = 1Ω (Direct) < = 4Ω (iEMatchsup>®) |
Channel Separation | > 79dB @ 600Ω Load (Direct) > 79dB @ 15Ω Load (Direct) (1kHz, TRRS plug Balanced wiring) |
Line Output | |
Dynamic Range(Line) | > 109dB(A) |
THD & N(0dBFS Line) | < 0.004% |
Output Voltage(Line) | 2.15V (+/-0.05V) |
Output Impedance | < 240Ω |
Channel Separation | > 99dB (@ 1kHz) |
Jitter(correlated) | Below test set limit |
Dimensions | 96(l) x 64(w) x 25.5(h)mm |
Weight | 139g (0.31 Ibs) |
Warranty period | 12 months |
+
iPurifier2
USB Audio Purification
The iFi iPurifier2 is packed with the very latest USB audio purification technology iFi. It not only has the original iPurifier’s REbalance® to re-equalise the unbalanced signal for an improved audio datastream, the iPurifier2 features the all-new Active Noise Cancellation® technology which cuts USB port audio band noise by 26dB or 20 times.* REclock* asynchronous technology eliminates USB jitter, frame and packet noise; it re-clocks/re-generates/repeats the USB signal (able to extend USB length) and restores signal integrity.
The iPurifier2 delivers a comprehensive USB signal quality solution. From common electrical, protocol, data and EMI/RFI issues, the iPurifier2 solves them all, in one, thumb-sized design. Digital audio is now more analogue then ever.
- Active Noise Cancellation® (ANC*) military-grade circuit
- REclock® re-clocks/re-generates/repeats the USB signal, eliminates USB jitter, frame and packet noise, restores USB signal integrity
- REbalance® corrects USB signal balance and impedance mismatch
- USB Audio Class 2.0 (supports all formats DSDS12/PCM768/2xDXD)
- USB 3.0 + 2.0 compatible input port, USB 2.0 High Speed output port
- Connectors: iFi ‘FINAL’ USB solid-aluminium connectors (Impedance: 90 ohms)
- Dimensions: 62(I)x19(w)x18(h)mm
- Weight: 30g (0.1 Ibs)
Specifications are subject to change without notice.